Nespresso Troubleshooting Pixie

Select another machine

Pixie

First Use

First Use

  1. Switch the machine on. Blinking light: heating up for approximately 25 seconds. Steady light: ready.
  2. Lift the lever completely and insert the capsule.
  3. During heat up, you can press the coffee button when it’s still blinking. The coffee will then flow automatically when the machine is ready.
  4. For a Latte Macchiato glass fold the cup support into the upright position. It will automatically fall down again when removing the glass to avoid any drips falling on to your kitchen surfaces.
  5. Take the cup. Lift and close the lever to eject the capsule into the used capsule container.
Coffee Preparation

Coffee Preparation

  1. Rinse then fill the water tank with potable water. The water tank can be carried by its cover.
  2. Switch the machine on. Blinking light: heating up for approximately 25 seconds. Steady light: ready.
  3. Lift the lever completely and insert the capsule.
  4. Close the lever and place a cup under the coffee outlet.
  5. During heat up, you can press the coffee button when it’s still blinking. The coffee will then flow automatically when the machine is ready.
  6. For a Latte Macchiato glass fold the cup support into the upright position. It will automatically fall down again when removing the glass to avoid any drips falling on to your kitchen surfaces.
  7. Press the Espresso (40 ml) or the Lungo (110 ml) button. Preparation will stop automatically. To stop the coffee flow or top up your coffee, press again.
  8. Take the cup. Lift and close the lever to eject the capsule into the used capsule container.
Energy saving concept and water level detection

Energy saving concept and water level detection

  1. To save energy, switch the machine off when not in use.
  2. Automatic power off: the machine will stop automatically after 9 minutes of non use.
  3. To increase automatic power off from 9 to 30 minutes: switch the machine off, press the Espresso and Lungo buttons simultaneously then press the ON/OFF button.
  4. Red backlight lights up: water tank is empty. Refill the water tank with potable water. Empty and rinse the used capsule container and the drip tray.
Programming the water volume

Programming the water volume

  1. Fill the water tank and insert the capsule.
  2. Press and hold the Espresso or Lungo button.
  3. Release the button once the desired volume is served.
  4. Water volume level is now stored.
Emptying the system before a period of non-use, for frost protection or before a repair

Emptying the system before a period of non-use, for frost protection or before a repair

  1. Switch the machine off.
  2. Remove the water tank. Close the Lever. Place a container under the coffee outlet.
  3. Press and hold the Espresso button and switch the machine on. Wait until no more water comes out.
  4. Machine switches off automatically.
Reset to factory settings

Reset to factory settings

  1. Switch the machine off.
  2. Factory setting: Espresso cup: 40 ml; Lungo cup: 110 ml.
  3. Press and hold the Lungo button and switch the machine on.
Cleaning

Cleaning

  1. Do not use any strong cleaning agent or solvent cleaner. Do not put in a dishwasher.
  2. Never immerse the appliance or part of it in water
  3. Clean the coffee outlet regularly with a damp cloth.
  4. To assemble the cup support and the drip tray: take off the grid, place them side by side and clip the drip tray to the cup support.
Descaling

Descaling

  1. Remove the capsule and close the lever.
  2. Empty the drip tray and the used capsule container.
  3. Fill the water tank with 0.5 L of water and add the Nespresso descaling liquid.
  4. Place a container (minimum volume: 0.6 L) under the coffee outlet.
  5. Switch the machine on.
  6. Blinking light: heating up. Steady light: ready.
  7. Press both coffee buttons simultaneously for three seconds. They will start blinking.
  8. Press the Lungo button and wait until the water tank is empty.
  9. Refill the water tank with the used descaling solution collected in the container and repeat step 8.
  10. Empty and rinse the water tank. Fill it with potable water.
  11. When ready, press the Lungo button to rinse machine.
  12. To exit the descaling mode, press both buttons simultaneously for one second. The machine is now ready for use.
  13. Caution: The descaling solution can be harmful. Avoid contact with eyes, skin and surfaces. We recommend the Nespresso descaling kit available from the Nespresso Club as it is specifically adapted to your machine. Do not use other products (such as vinegar) that would affect the taste of the coffee.
No light indicator.
  • Check the mains, plug, voltage, and fuse. In case of problems, call the Nespresso Club.
No coffee, no water.
  • First use: fill water tank with warm water (max. 55° C) and run through machine according to instructions on 'First Use' guide or user manual
  • Water tank is empty.Fill water tank.
  • Descale if necessary; see Descaling section.
Coffee comes out very slowly.
  • Flow speed depends on the coffee variety.
  • Descale if necessary; see Descaling section.
Coffee is not hot enough.
  • Preheat cup.
  • Descale if necessary.
Capsule area is leaking (water in capsule container).
  • Position capsule correctly. If leakages occur, call the Nespresso Club.
Irregular blinking.
  • Call the Nespresso Club.
No coffee, just water runs out (despite inserted capsule).
  • In case of problems, call the Nespresso Club.

Specifications

Weight3 Kilogram
Removable water tank0.7 litre
Dimension (WxDxH)11.1 X 32.6 X 23.5 cm
Pressure19 bar
Automatic power offafter 9 mins
WarrantyAs stated in user manual or benefit from a full 3 year limited warranty as a member of Nespresso & You
Power220-240 V 50-60 Hz <1260W
Used capsules container capacity 9-11